Description
Here is my Tamiya 1/32 A6M5 Zero Type 52.
The Eduard
photo-etched cockpit set was used (most of the parts anyway), as
well as about 70% of the PE engine set.
All paints used were from
Testor.
The chipping was achieved by painting Testor's buffable
Metalizer as an undercoat, followed by a protective coat of future,
and finally a top coat of the camoulfage colors.
Finally, when
the paint was dry, I wrapped masking tape
around my fingers and dabbed it on the surface of the model to chip
the paint.