Home     What's New     Showcase     Workshop     Products     About Testor     Search     Links


Hasegawa's 1/48 scale
F4U-5N Corsair

by Keith Gabriel

 

 

Description

Here is my 1/48 Hasegawa F4U-5N Corsair built straight out of the box with the exception of the cockpit.

As supplied, the cockpit is not bad but falls short due to the absence of side wall detail and the switches located above the instrument panel. You can scratch build the sidewalls and switches which are fairly simple affairs or purchase the True Details replacement cockpit. I chose to use the True details cockpit but kept the kit instrument panel since it had crisper detail. The True Details cockpit also provides a better seat and a beautifully cast K14 gun sight.

 



The kit goes together fairly well with only minimal need for putty and filing.
One area of concern is the cowl which has a nasty seam (which looks like a panel line) that needs to be eliminated. There is also no framing detail inside the rear wheel well, but after the installation of the rear wheel and arrestor hook very little of the inside can be seen so I chose not to scratch build the framing.

The main gear doors also have some very inconveniently placed sinkholes that were rather difficult to clean up.

I replaced the kit wheels with a set from True Details since the kit wheels looked a bit narrow. The kit comes with a good selection of bombs, rockets, and belly tanks, though the rocket fins are a little bit on the thick side and could be replaced with thinner plastic card items. One major shortcoming is the front canopy which has a very bad fit and I would recommend a Squadron Vac canopy replacement.

 



I chose the standard Gloss Sea blue paint scheme of VC-3 Det. D, Lt. Guy P. Bordelion Korea July 1953. An interesting point is that the instructions called for the radar dome to be painted black but general references I had showed it painted white. I chose to paint the dome black since it may have been specific to Lt. Guy P. Bordelion aircraft. I weathered the aircraft only moderately and used a silver pencil to add paint chipping. The entire aircraft with the exception of the anti-glare panel was given a coat of Future and then the decals were applied. These settled down quite nicely which was a bit of a surprise since I always have trouble with Hasegawa decals. I then applied a final gloss coat to the entire model with Testor's Dullcote being applied to only the anti glare panel.

Aside from the minor short comings of the cockpit and cowl this is an excellent offering from Hasegawa. With an overall excellent fit and good decals I would strongly recommend it.

 

 

Given that I'll just have to build the all black night interceptor!


 

Home     What's New     Showcase     Workshop     Products     About Testor     Search     Links

Click the thumbnails below to view larger images:

Photographs and Text Copyright © 2006 by Keith Gabriel and Testor Corporation